The Janome MB-4 is the "World's First" home-use four-needle embroidery machine! Everything you love about Janome embroidery with four times the capacity! And so easy! Just set up your embroidery and move on to other projects while the MB-4 gets it done.
The MB-4 works with most embroidery formats, including those used by industry professionals. It can use six industry-standard Tajima hoops, as well as the four available Janome hoops to further expand your creative opportunities.
Backlit LCD screen.
Auto thread cutter.
Built in features.
Built-in designs: 100.
Monogramming: 2 & 3 letter.
Expanded built-in memory.
Stitch-out time indicator.
Upper thread and presser foot sensors.
Manual thread tension control.
Embroidery speed up to 650spm.
Embroidery area tracing.
Large 5.5 inches x 7.9 inches (140mm x 200mm).
Standard 5 inches x 4.3 inches (126mm x 110mm).
Change colors to favorite thread: Janome, Robison-Anton, Madeira, Mettler.
Drag & Drop editing for easy placement.
Embroidery design resize 90% - 110% by 1%.
Rotate in 1 and 45 degree increments.
Flip vertically and horizontally.
Zoom in and out.
MY SET screen controls for contrast, in/cm, designation, and other customization.
USB memory key compatible.
ATA PC card port.
Compatible with Janome software.
Ball bearing precision.
Remote Computer Screen (RCS).
The Remote Computer Screen (RCS) gives you total set-up and editing control with up to 65,536 colors. One RCS can power many machines, saving the cost of additional controllers.
The LED Light offers precise lighting for outstanding results.
Automatic Thread Cutter.
The MB-4 automatically cuts jump threads - even between letters - saving you time and hassle.
Dedicated Bobbin Winding Motor.
This feature - not found on professional machines - winds new bobbins even while the machine is stitching a design.
On Board Control,
The MB-4 includes an on-board sub-control device. You can use it without the controller! The MB-4 also includes 3 MB of memory which can store up to 1,500,000 stitches or up to 100 designs.
Link Directly to PC.
The on-board USB slave port connects directly to your PC with Digitizer MB software, sold separately.
Three included MB-4 hoops snap in and out with ease. They provide the embroidery areas most often used in the industry. The MB-4 is also fully compatible with industry-standard Tajima hoops.
Needle (DB x K5Q1-NY).
Felt Ring (large).
Felt Ring (small).
Hoop M1 (240 x 200).
Hoop M2 (126 x 110).
Hoop M3 (50 x 50).
Thread Guide Bar.
Thread Guide Pole.
Power Supply Cable.
Single head 4-needle embroidery machine.
Upper thread breakage sensor.
Built-in auto thread cutter (needle & bobbin threads).
Thread cutter for bobbin winding.
Number of needles: 4.
Type of needles: DBxK5Q1NY #11.
Maximum speed: 800 spm.
Low range speed: Up to 400 spm.
Bobbin winding speed: 2,000 rpm.
DB rotary hook (full rotary).
Machine control: By Remote Computer Screen (option) or Sub-Control Panel.
Sub-Control Panel: LCD with backlight (H12 x W63mm).