Janome 634D Serger Review

Janome 634D Serger Review

Why should you buy a Janome 634D serger? A serger is the one tool that can quickly boost your sewing to pro level, and the Janome 634D serger is my choice for the serger to buy. Janome has earned my loyalty with their always well-designed machines; I know I can trust this brand to provide high performance and quality. Janome packs all their machines with user friendly features, and the 634D is no exception:

Janome 634D features

  • 1 or 2 needle serging
  • Serge with 2, 3, or 4 threads
  • Lay-in threading
  • Automatic threader for lower looper
  • Retractable cutting blade
  • Easy switch between serging and rolled hemming
  • Adjustable stitch length
  • Variable differential feed: from 0.5 to 2.25
  • Cutting width adjusts from 2.0 to 5.7 mm
  • Spool pins, caps, and nets for greater thread choice
  • High presser foot clearance
  • Snap-on presser feet
  • Thread cutter
  • Seam guide
  • Waste catcher
  • Accessory box
  • 2 access doors
  • Convenient carry handle

While this impressive list of features is enough to convince anyone that the Janome 634D is an excellent value, choice machine, there is more to it than this.

Janome 634D is fast, quiet, compact and smooth

Janome 634D Serger Review

Janome 634D Serger Review

This sweet baby sews 1,300 stitches per minute, which means you can get a lot more done in a fraction of the time. For comparison, most regular sewing machines sew between 700-900 stitches per minute. It sews quickly but quietly, and makes much less noise than many other sergers.

Though the 634D is equipped with a strong motor, its housing is compact for easy portability. Measuring just 16x16x16 inches, it easily fits a small table and is not a monster to move. It weighs in at less than 21lbs, so it won’t hurt your back to carry it with the convenient, built-in handle.

That strong motor serges smoothly. My first Janome serger was a more economy model, and while it works well, I had to place a thick rubber pad underneath it to prevent it from jiggling all over the table. No mat is needed with this Janome, however; the 634D is a smooth operator.

I would describe the motor on the economy Janome machines as being like a Honda Civic; they are dependable and sturdy and a great and affordable way to get you where you want to go. In contrast, the Janome 634D “drives” more like an Acura, with more power, speed, and a smoother ride.

The Janome 634D offers more options

This machine offers almost endless options for serging. It can do a 2 thread stitch, whereas lesser models need at least 3 threads.  The Janome 634D can use from 2, 3, or 4 threads. It can also use either 1 or 2 needles. The cutting width is highly adjustable, offering a wide range of possible options. You can even disengage the cutting blade entirely and serge without cutting at all.

The Janome 634D can also further save on thread, because it comes standard with 4 spool caps and nets, allowing you to use regular spools of thread as an alternative to larger serger cones.  The spool pins will  accommodate the serger cones, too, of course; you can use either type of thread with this serger.

The Janome 634D is especially easy to use

Other makes of serger require you to change plates when switching between conventional sergering and rolled hemming. It is common to move back and forth between these two options, and Janome makes this much easier to do. Instead of having to switch out plates, you simply move a switch to change between serging and rolled hemming. The presser feet are easy to change, too; they simply snap on and off, with no trouble at all.

This serger also has automatic threading for the lower looper. It takes a lot of patience and attention to thread the loopers on other machines, but threading the Janome 634D couldn’t be easier. There are clear diagrams printed right on the inside of the machine for ease in threading the guides. And instead of praying for patience to thread a tricky lower looper, you just push a button and  it is magically threaded for you!

Another thing that I really appreciate about the Janome 634D is it that it is neater and easier to clean than other models. It has a handy waste-catching tray built in, so your sewing room floor will not be littered with thread tails and the trimmings your serger cuts from your seams and projects. Furthermore, it includes 2 doors, one on the front and one on the side, which more easily enables thorough cleaning.

Buy yours now

This machine could quickly take you from home sewist to professional seamstress. You need this reliable workhorse machine and now is a great time to buy it, since it is on sale at a great price. Quit wishing for one and go ahead and order yours now!

Leave a Reply

Your email address will not be published. Required fields are marked *