Durkee Hooping Pro Stations - Full or Project Station With Bundle Options

Full Station

Designed for hooping adult sized garments – left or right chest and full fronts and backs. This station will accommodate virtually any size or style hoop from any manufacturer including commercial hoops, wooden hoops, magnetic hoops, and single needle embroidery machine hoops. No additional parts, fixtures, or attachments are required or needed. Free Bonus With Purchase of Full Station or Purchase of BOTH Stations Only: Embroider's Helper placement guide, Big Helper for shirts above Large, and Pocket Guide for logo placement.

• Use almost any size or style hoop - tubular hoops, magnetic hoops, wooden hoops...no additional attachements required.
• The Slot Design allows for Infinite width adjustment and lets the embroiderer hoop their project precisely where they want it.
• Three table angles to provide the most ergonomically comfortable hooping position for the embroiderer.
• Solid steel legs with rubber feet prevent station movement during hooping and holes in the legs are provided so the station can be permanently attached to the embroiderer’s existing work surface.
• Includes PAL2 laser alignment tool with a table mount and laser light holder that can be mounted directly to either leg of the Full Station.
• Includes 8 brass hoop holders
• Includes 2 Embroidery Backing/Stabilizer Holders
• Includes 2 Freedom Ring Mounts

Project Station

Designed for hooping specialty projects such as backs of caps, onesies, pant legs, shirt sleeves, tote bags, etc. The Hooping Pro Project Station is compatible with hoops from any brand and model of multi-needle commercial or single needle home embroidery machine. This station will accommodate virtually any size or style hoop from any manufacturer including commercial hoops, wooden hoops, magnetic hoops, and single needle embroidery machine hoops. No additional parts, fixtures, or attachments are required or needed.

• Use almost any size or style hoop - tubular hoops, magnetic hoops, wooden hoops...no additional attachements required.
• The Slot Design allows for Infinite width adjustment and lets the embroiderer hoop their project precisely where they want it.
• Three table angles to provide the most ergonomically comfortable hooping position for the embroiderer.
• Solid steel legs with rubber feet prevent station movement during hooping and holes in the legs are provided so the station can be permanently attached to the embroiderer’s existing work surface.
• Includes 8 brass hoop holders
• Includes 2 Embroidery Backing/Stabilizer Holders
• Includes Freedom Ring Mounts

Plus Station Board

The Plus Station Board was designed to economically address specific hooping needs. The Hooping Pro Project Station serves as the base unit for the Plus Station Board which slides directly onto the Hooping Pro Project Station in seconds. The “Plus” Board is the exact same width as the “Full Station” but is only 14” tall. Adult garments requiring left and/or right embroidery can be hooped on this board with sizes up to 2 XX with an 18cm hoop. Includes: Two (2) additional stabilizer legs to mount to your Hooping Pro -Project Station to provide additional stability. Two (2) spring –loaded centering pins for locating the center of your design on the board.

Junior Station Board

The Junior Station Board was designed to economically address specific hooping needs. The Hooping Pro Project Station serves as the base unit for the Junior Station Board which slides directly onto the Hooping Pro Project Station in seconds. The “Junior” Board is 13” wide and 14” tall and is designed to accommodate youth size garments. Includes: Two (2) additional stabilizer legs to mount to your Hooping Pro -Project Station to provide additional stability. Two (2) spring –loaded centering pins for locating the center of your design on the board.

Infant Station Board

The Infant Station Board was designed to economically address specific hooping needs. The Hooping Pro Project Station serves as the base unit for the Infant Station Board which slides directly onto the Hooping Pro Project Station in seconds. The “Infant” Station is 8 ½” wide and 14” tall. The combination of a Project Station with an “Infant” Board, will expand hooping options as a child grows. The Project Station by itself will accommodate most all new born projects. As the child grows, the “Infant” Board will slide onto the Project Station and accommodate children’s sizes up to 4T. Includes: Two (2) additional stabilizer legs to mount to your Hooping Pro -Project Station to provide additional stability. Two (2) spring –loaded centering pins for locating the center of your design on the board.