Tag / deadline

In the Wee Hours of the Morning
by Vanessa Nirode

In the Wee Hours of the Morning

I’ve always been a morning person, or rather, I’ve never really found it that difficult to get up at before the crack of dawn. I’m usually not ready to actually talk to anyone until after the sun is up but, I actually really like the quiet pre-dawn hours, especially in a big city, like New York.

The bars here close at 4:00 am so the hours between four and six are the transition between last night and this morning; people who work in bars are on their way home (as well as those who were just out drinking) while another whole group of people are on their way to work. The streets are relatively quiet without much traffic – a true rarity in New York City. Cycling through the early morning streets always feels like a special, secret thing. The cabs that are out and about rarely honk this early and we share the roads without incident.

Top of the morning

A lot happens in the city between the hours of 4:00 am and 7:00 am. I’m not the only one out. Central Park is already humming starting at 5:00 am with runners, walkers, cyclists, and dogs. The street vendors are up and opening up their carts. Most bodegas are open already (many of them stay open all night). On the weekends, there are bike races and running races (the NYC half marathon was yesterday) and, all about the city, especially if its Monday morning, film and television crews are going to work, or are already at work.

If you want to work in film and television, you have to be able to get up early. And I mean early, like before 5:00 am, and, if you’re in the wardrobe of hair and makeup departments, often before 4:00 am. It’s not unusual for the costume and wardrobe departments to have to be at work by 5:30am, or 5:00 am. I’ve even had to be at work by 4:30 am before.

Actor call times for this morning, including fitting times.

Actor call times for this morning, including fitting times.

The main reason for this is the sun, and the fact that most shooting days are, at a very minimum, twelve hours long. Mondays usually mean a super early start as the goal is often to start filming outside as soon as the sun is up (you don’t want to miss any of that precious daylight, especially in the winter months when the days are shorter).

It’s all about proper preparation

In order to have the actors ready to go on set when the sun is up, they need to get to work an hour or two beforehand to go through hair and makeup and to get dressed. If it’s day that requires a large amount of background actors to be dressed and ready to go in the first shot, they (and the wardrobe people who are there to help them get ready) often must report to work a couple hours before sunrise.

As the tailor, I often have to be at work for an early morning fitting that happens before an actor goes to hair and makeup. Then I have the hour or so when they’re “in the chair” as we call it in the film business, to complete an alteration. This is also when my fast sewing skills come in handy.

The early bird

This Monday on Blindspot, we’re in the studio on the stage so all the scenes are interior but, general crew call is still 7:00 am.

This Monday on Blindspot, we’re in the studio on the stage so all the scenes are interior but, general crew call is still 7:00 am.

This Monday on Blindspot, we’re in the studio on the stage so all the scenes are interior but, general crew call is still 7:00 am. We were also on the stage most of last week, including Friday, so the crew will be pretty much ready at 7:00 to start shooting. If we’ve been out somewhere on location shooting, sometimes an extra half hour or so is needed to get the lights ready, the cameras out, the props set, etc.

Times the wardrobe, costume, and hair & makeup departments had to be at work this morning.

Times the wardrobe, costume, and hair & makeup departments had to be at work this morning.

The wardrobe crew, though, was here at 5:42 and 6:00 and the first actors arrived by 6:00.

Sometimes people ask how I’m able to get up so early. I honestly don’t know the answer. I will say that I think you do get used to it. I actually hate when I don’t have to be at work until 9:00 or 10:00, mainly because it can take twice as long to get there when you’re in the midst of rush hour traffic. I’d choose the 5:00 and 6:00 am starts every time.

I do my best, focused work early in the morning; things don’t seem as frenetic before the sun is up. There are fewer distractions, the phone doesn’t ring, the only texts are most likely directly related to whatever I’m working on, people aren’t quite awake yet so there’s less chit chat. Things just seem to flow along at a steady, quiet, unencumbered pace.  Also, when you get to work at 6:00 in the morning, you get to have second breakfast at 10:00 – and who wouldn’t be up for that?

How to Sew Faster
by Vanessa Nirode

How to Sew Faster

My job as a tailor on a television show often requires me to complete an alteration in a seemingly impossible amount of time. Not to be overly cocky or self-congratulating but, I can be pretty fast when needed. People frequently ask me how I’m able to do something so quickly.

Don’t hesitate. Just, do.

Honestly, I don’t think so much about it anymore: its pretty much second nature at this point. But, I suppose if I were to break it down, the process would go something like this:

First, don’t panic. Whatever you do, don’t panic. If you do, you could find that suddenly you’re unable to thread a needle, or your needle breaks, or the thread tangles.

Second, don’t hesitate. Just, do.

As you’re working, think about the next step. Plan ahead.

Concentrate fully on what you’re doing. Don’t listen to the conversations going on around you. Pay no mind to whatever random chaos might be happening in another part of the room. Just focus your full attention on the one thing you are doing. That is all that is important.

Whatever you do, don’t thread mark. I know that’s what they teach in sewing school but there is no reason to have to thread mark a pant hem.

A few tips on how to sew faster:

Do as much as you can without stopping to iron.

If I’m really pressed for time, I tend to leave all the ironing until the very end (pun intended).

Learn how to eyeball measurements. Think about it, if you’ve been sewing long enough, you know what a ½” looks like. You honestly do not need to mark every single little line. If you want to measure, go ahead, put use your pins to mark the line. I often work with a metal seam gauge but rarely actually draw a new stitching line. One exception is if I’m re-mitering a suit jacket sleeve corner though I know lots of tailors that do not need to draw that line either.

Whatever you do, don’t thread mark. I know that’s what they teach in sewing school but there is no reason to have to thread mark a pant hem. I once had an additional tailor helping me on a show who insisted on thread marking the fold line on hems for cop pants. Buy some tailor’s chalk and use that to mark your hemline. It’ll disappear when ironed.

Unless you’re topstitching, you really don’t have to have your thread match exactly. Believe me. Whatever thread is in your machine is just fine. I cannot begin to tell you how many black garments I’ve altered quickly with red or yellow or whatever happened to be in the machine colored thread.

Learn how to undo a chain stitch. A lot of manufacturers use chain stitches in clothing construction. This makes it super easy to take them apart when needed. You can only unravel a chain stitch in one direction, the direction it was sewn in. Most of the time, all you need to do is insert a seam ripper and pull in that direction and all the stitching will come undone. The center back seam of men’s pants, often will have two rows of stitching so you’ll need to pull each row separately.

A couple other seam deconstruction tips:

To take apart a serged seam, use a nice sharp seam ripper and run it through the threads that wraps around the edge of a seam. After you do this, the rest of the threads will usually come apart rather quickly. Some serged seams are on a chain as well and you can undo them by pulling the thread on the straight stitch.

One of the fastest ways of taking apart a seam is to, again, use an extremely sharp seam ripper and insert it into the seam from the right side and just pull upwards through the seam. This technique takes a bit of practice (and bravery) though as the potential to accidentally slice through the fabric is ever present. There’s a knack to getting the angle of the seam ripper just right though and once you figure that out, you’re golden.

In the end, the one sure way of becoming a faster tailor is by practice. The more often you repeat the same task, the more efficient at it you become.

As you do an alteration, try to think of ways you could save time: do you really need to flip everything back right side out then inside out then right side out again? Probably not. If you sew this first, will it make it easier to sew this? Or visa versa? Experiment and try things multiple ways until you’ve figured out the quickest sequence of steps for yourself.

I love discovering a new, faster way of doing something I’ve done a million times. Sewing is kind of cool like that: there’s always something more to learn and fresh tactics to uncover.