Juki 1900-BHS Computer Controlled Highspeed Bartacking Industrial Machine Includes Table and Servo Motor (Table Comes Assembled)

Juki 1900-BHS Computer Controlled Highspeed Bartacking Industrial Machine

Includes Fully Assembled Table and Servo Motor - Includes basic programming. *Custom programming and clamping fees may apply.

The sewing machine achieves the highest sewing speed of 3,200 stitches per min in the industrial sewing machine industry.

This Juki computerized industrial sewing machine runs at 3,200sti/min, faster than any other sewing machine ever made. The proven computer-controlled bartacking machine has been dramatically evolved to be an easier-to-use machine.

Assembled Table & Servo Motor

This Package includes a Fully Assembled Table and a Servo Motor.

Higher Productivity

The machine runs at 3,200sti/min, faster than any other sewing machine ever made.
In addition to the high-speed sewing performance, cycle time can be substantially decreased (reduced approximately 30% compared to our predecessor model: For 42-stitch large bartacks).

The Sewing Starting Point can be Corrected

The sewing starting point can be shifted in the X/Y direction. This enables the correction of a sewing pattern in accordance with the presser foot configuration.

Simple Work Clamp Kit

Conventionally, the front plate has to be removed to change the work clamp. With the new work clamp kit, the work clamp can be changed without removing the plate.

Control Box Panel

Functional settings, such as pattern numbers, enlargement/reduction scales, swing speeds and needle thread tensions can be established through the operation panel with ease.

The operation panel has been installed at an angle and can be placed at the top, bottom, right or left part of the table according to the operator's preference.

Reduction of Noise and Vibration

The main shaft and the thread take-up lever mechanism have been reworked to enable the reduction of noise and vibration. As compared with the conventional model 1900-BHS, the noise is reduced by 3.9 dB and the vibration is reduced by 1.65 dB.

Excellent Seam Quality

The Juki computerized industrial sewing machine comes with a newly developed needle thread grasping mechanism. The mechanism prevents thread from slipping off from the needle eyelet at the beginning of sewing, from tangling on the wrong side of the material and also being stained during sewing.

Eliminated Oil Stains

Thanks to our advanced dry-head technology, the frame (needle bar and thread take-up) no longer requires lubrication. This prevents the material from being stained with lubricating oil.

Active Tension

Since the machine is provided with an active tension mechanism, it is able to set a needle thread tension that matches various sewing conditions (such as thread, material and sewing speed) on the operation panel, store the data in memory and reproduce it.

Auto-Lifter

The presser foot lift can be set to a maximum of 17mm by using the reverse-rotation needle-up function in combination with the auto lifter mechanism.

Excellent Workability and Operability

The direct-drive head (with no belt), which is directly connected to a compact AC servomotor, achieves outstanding responsiveness and improved stop accuracy. This head helps create a comfortable working environment with reduced vibration and noise.

The arm section of the machine head is fitted with a hand pulley. This allows the operator to visually check the needle entry points.

Machine Specifications

Motor Options

Clutch motors operate at a fixed speed, typically between 1725 - 3450 rpm, depending on the type of machine. Servo Motors on the other hand are speed adjustable. The two major advantages of the Servo Motor are that you can control the speed of the motor and that the motor is completely silent when the pedal is not engaged.

Some other advantages of the Servo Motor include:

• They consume up to 90% less energy than clutch motors
• 1/3 lighter than clutch motors
• Reverse motor rotation with the flick of a switch
• Nothing to wear or adjust
• Adjusted speed remains the same no matter how hard the pedal is pressed

Most of our customers find that the sewing machine is much easier to control with a Servo motor because of the speed control. This is especially helpful for beginner sewers but also for projects that simply don't require high speed stitching.

Optional T-Leg Table Stand with Wheels Upgrade

Features:

• Adjustable Height
• Caster Wheels
• Heavy Duty Steel Construction

Instruction Manual Download

Juki 1900-BHS Instruction Manual