Janome 1110DX My Lock Serger
Call 1-800-401-8151 for details.
Janome 1110DX Serger
The 1110DX makes serger sewing easy! Incorporating the differential feed system of two feed dogs, puckered edges on woven fabrics and stretched edges on knits are virtually eliminated. The rolled hem conversion feature eliminates the need to change the needle plate, foot, or tension setting for rolled hemming. Restructured lower looper guides allow easy access. The included threading card and color-coded guides are easy to follow for 2, 3, or 4 thread serging.
Easy to Follow Upper Thread Guides
The Threading Chart and Color-Coded Guides are easy to follow for 2, 3, or 4 thread serging.
Adjustable Cutting Width
By turning the dial, you can easily adjust the desired cutting width.
Easily Retractable Upper Knife
Simply press in the knob and push the knife down to deactivate.
Easy to Reach Lower Looper Guides
Threading the Lower Looper is a breeze when you have easy access. Just rotate the thread guide and the lower looper thread guides pop into view.
Quick Change Rolled Hem
No need to change the needle plate for rolled hemming. Just slide the needle plate to "R" position and choose "RH" on the lower looper pre-tension slider.
Dual Feed Dogs
The 1110DX has a Differential Feed Device with two feed dogs, virtually eliminating puckered edges on woven fabrics and stretched edges on knits.
- 2 and 3 / 4 thread overlock
- Regular type needle
- 1 - 5mm seam length
- 3.5mm (regular); 5.7mm (wide); 2.0mm (narrow) seam width
- 0.5 - 2.25 differential feed ratio
- Front and back needle guard
- Color coded thread guides
- Snap-on presser feet
- Electronic speed control
- Easy to follow upper thread guide
- Dual feed dogs and differential feed
- Adjustable cutting width
- Easily retractable upper knife
- Easy to reach lower looper guides
- Quick change rolled hem
- Solid metal base plate
- Skeleton Body Construction
- Lay-in Tension Dial
- 2, 3 and 4 Thread Convertible
- Maximum Speed: 1,300 spm
- Incorporated Tension Release Device
- Incorporated Rolled Hem Changed Over Device
- Adjustable Foot Pressure (Adjusting Screw)
- Snap-on Presser Foot
- Feed Adjustment: Dial on Belt Cover (with Window)
- Differential Feed Adjustment: Dial on Belt Cover (with Window)
- Dial Cutting Width Adjustment
- Aligned Spool Pin Spool Stand
- Carrying Handle: Part of Machine Body
- Thread Cutter (Underneath the Face Plate)
- Length of Feet: 1 to 5 mm
- Differential Feed Ratio: 0.5 to 2.25
- Cutting Width: 3.1 - 7.3 mm
- Waste Chip Box
- Accessory Box
- Foot Controller
- Screwdriver (Large)
- Screwdriver (Small)
- Set of Needles
- Lint brush
- Spool Cap
- Upper Knife
- Needle threader
Get introduced to this product: Janome 1110DX My Lock Serger!
View these images to get a better idea of what you'll purchase! Click on the thumbnail to enlarge!
Get introduced to this product:
Janome 1110DX My Lock Serger!
View these videos to get a better idea of what you'll purchase!
No rating yet... Be the first to rate this product!
Need more supplies? Find them below! Just add them to cart directly form this page.