You will love Hoop-It-All's unique sliding bracket that attaches to your machine's embroidery unit, allowing the hoop to slide within it. This feature allows you to tighten the hoop in any position along the hoop rails. Because of this wonderful feature, you can embroider the entire inner area of the Huge embroidery field.
Super-GIANT-L Hoop-It-All enables the home embroiderer, "with only one hooping", to embroider a combination of designs from different memory cards. A combination of designs that you have created on your software can be sewn out simply by sliding the hoop bracket to the correct position on two sides of the hoop without re-hooping. The attachment bracket on the hoop can be removed and placed on two sides of the Super-GIANT-L Hoop-It-All. The hoop bracket can slide up and down on both sides in any position and be locked in place allowing the hoop to move to any location required on two sides.
The Super-GIANT-L (long) is the largest in the world, used for machine embroidery. It works with embroidery machines that are designed with the embroidery arm located left of the needle. The Super-GIANT-L Hoop-It-All frame is not interchangeable with any other sliding Hoop-It-All brackets, as its sliding rails are thicker in order to stabilize the length of the new frame to keep it from bending.
Included with the new Super-GIANT-L hoop is a NEW "UNIQUE" ADJUSTABLE extension table. Both the front and back of the table can be adjusted closer or farther away from the machine without removal of the table. The table will support the hoop as it sews off the front or back of any table or cabinet and remain stable, but the table must be kept away from any barriers such as walls for adequate clearance. This new extension table will not interfere with changing bobbins or computer cards, making it easier for the embroiderer to make these changes. It has a platform upon which the embroidery machine is placed. Two sliding tables are mounted - one in front and the other in the back to support the hoop, which are adjustable.
The Super GIANT-L Hoop-It-All can also help in areas such as shirt fronts when embroidery is done above a pocket and between button holes.
Each sewing machine is limited by its own built-in embroidery field. The Super GIANT-L Hoop-It-All can not change the embroidery field, but by using a sliding bracket, which can be placed both sides of the hoop there is less need to re-hoop.
The Giant Hoop kit includes:
- 1 Giant Hoop
- 1 Sliding bracket (specially designed for each machine)
- 1 Giant Hoop Support Table
- 1 Small roll of SIA Stabilizer (Required)
- Illustrated Instructions
Fits: Baby Lock model ESE 1, ESE 2, and Ellure
Outer Dimensions (W x L): 7 1/2" x 23"
Sewing Field (W x L): 5" x 20"
Use this product to try these techniques on your project!
(These .pdf files will open in a new window and require Adobe Reader to be viewed. If you do not have Adobe Reader, click here to download the program free.)
California residents: view Proposition 65 warning
California Proposition 65
WARNING
This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
Attention California residents: California’s Proposition 65 entitles California consumers to special warnings for products that contain chemicals known to the State of California to cause cancer and birth defects or other reproductive harm if those products expose consumers to such chemicals above certain threshold levels. We know you’re concerned about product safety, and Target takes all necessary steps to comply with all applicable safety and health requirements.
On SewingMachinesPlus.com, we provide a Prop 65 link for each item that requires the Prop 65 warning. If a Prop 65 link does not appear in the product info section for the product you wish to purchase, the supplier of the product has indicated that it does not require the Prop 65 warning.