Accuquilt GO! Tulip Pattern 55328

This product is discontinued and no longer in stock. Browse our full line of dies and accessories or call us at 800-401-8151 to find a similar product.

GO! Tulip Pattern 55328

Spring has sprung! The GO! Tulip die cuts two perfectly precise petal shapes to make one gorgeous tulip. Apply fusible web to the wrong side of your fabric before cutting and you'll have applique-ready tulips in a flash. A great way to use scraps or stash!

Two outside petals 2 1/8"W x 3 13/16"H (5.4 cm x 9.7 cm) and one center petal 1 7/16"W x 4"H (3.7 cm x 10.2 cm)
Use GO! Cutting Mat, 6" x 6" (15.2 cm x 15.2 cm) Item 55137

Warranty: AccuQuilt GO! dies are guaranteed for one year.

Care & Maintenance: Use adhesive lint roller to clean lint and thread from dies. After each use, with the die pick provided with the cutter, remove any threads imbedded between blades and foam. It's normal for threads to get caught where blades meet in a die. Remove with tweezers or die pick. Die blades never need to be sharpened.

Die Tips:

• With some fabrics, after cutting, a thread or two will remain where die blades meet. Snip threads with scissors.
• Use cutting mats that matches size of each die.
• For best results, cut with die blades running under roller at an angle. Do not cut with blades parallel to roller.
• Blades on some dies are positioned at an angle. Align fabric to edge of shape, not edge of die board.
• Some dies feature specially designed corners to aid in alignment and pre-cutting.
• For fast applique, apply fusible web to fabrics, then cut shapes with dies.
• Use good quality fabric to reduce fabric stretch.
• It's always a good idea to test cut one shape before cutting many shapes to ensure fabric orientation is correct.